Except For Outback Model

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the ground cable from battery.
Remove the front fog light cover (A).

Fig 1: Identifying Front Fog Light Cover
Disengage the two clips, and then turn over the lower mud guard.

Fig 2: Locating Lower Mud Guard Clips
Disconnect the harness connector.
Remove the mounting bolts, then detach the fog light assembly by pulling it out.

Fig 3: Locating Fog Light Assembly Mounting Bolts