LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Washer System & Wiper System) >> Combination Switch (Wiper) >> Inspection >> Combination Switch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Combination Switch

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect the continuity between each connector terminal.
    Fig 1: Identifying Combination Switch
    G04991454
    COMBINATION SWITCH TERMINAL REFERENCE

      Switch position Terminal No. Standard
    Front OFF 7 and 16 Less than 1 Ω
    INT 7 and 16 Less than 1 Ω
    LO 7 and 17 Less than 1 Ω
    HI 8 and 17 Less than 1 Ω
    Washer ON 2 and 11 Less than 1 Ω
    Rear Washer ON 2 and 12 Less than 1 Ω
    OFF - 1 MΩ or more
    INT 2 and 13 Less than 1 Ω
    ON 2 and 10 Less than 1 Ω
    Washer ON 2 and 12
    12 and 10
    2 and 10
    Less than 1 Ω
  2. If continuity is not as specified, replace the switch.