Section 88 (Front Suspension): General Description: Specification
WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
FRONT SUSPENSION SPECIFICATION
| Model | Sedan | Wagon | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 2.5 i | 2.5 GT | OUTBACK | 2.5 i | 2.5 GT | OUTBACK | |||||
| Front | Wheel arch height (Tolerance: +12 mm -24 mm (+0.47 in -0.94 in)) |
mm (in) | 381 (15.0) | 439 (17.3) | 381 (15.0) | 439 (17.3) | ||||
| Camber (Tolerance: ±0°45' Differences between RH and LH: 45' or less) | -0°15' | 0°40' | -0°15' | 0°40' | ||||||
| Caster (Referential Value) | 5°55' | 4°55' | 5°40' | 4°55' | ||||||
| Steering angle (Tolerance: ±1.5°) |
Inner wheel | 37.6°, 33.8°(1) | 37.6° | |||||||
| Outer wheel | 33.0°, 30.2°(1) | 33.0° | ||||||||
| Toe-in | mm (in) | 0±3 (0±0.12) Toe angle (sum of both wheels): 0°±0°15' | ||||||||
| Kingpin angle (Referential Value) | 13°45' | 12°05' | 13°45' | 12°05' | ||||||
| Rear | Wheel arch height (Tolerance: +12 mm -24 mm (+0.47 in -0.94 in)) |
mm (in) | 365 (14.4) | 438 (17.2) | 375 (14.8) | 438 (17.2) | ||||
| Camber (Tolerance: ±0°45' Differences between RH and LH: 45' or less) | -0°40' | -0°10' | -0°30' | -0°10' | ||||||
| Toe-in | mm (in) | 0±3 (0±0.12) Toe angle (sum of both wheels): 0°±0°15' | ||||||||
| Thrust angle (Tolerance: ±0°30') | 0° | |||||||||
|
||||||||||
NOTE:
- Front and rear toe-in and front camber can be adjusted. Adjust if the toe-in or camber tolerance exceeds specifications.
- Other items indicated in the specifications table cannot be adjusted. If other items exceed specifications, check the suspension parts and connections for deformation, and replace with new parts as required.