Power Window Switch: Service and Repair

POWER WINDOW CONTROL SWITCH

REMOVAL

1. MAIN SWITCH

1. Disconnect the ground cable from the battery.
2. Open the screw cover by using a flat tip screwdriver.
3. Remove the screw to remove the power window main switch panel.






NOTE: Remove it from the cutout portion at the tip of the switch panel.






4. Disconnect the connector.
5. Remove the screw to remove the power window main switch assembly.

2. SUB-SWITCH

1. Open the screw cover by using a flat tip screwdriver.
2. Remove the screw to remove the power window main switch panel.






NOTE: Remove it from the cutout portion at the tip of the switch panel.






3. Disconnect the connector.
4. Remove the screw to remove the power window main switch assembly.

INSTALLATION

Install in the reverse order of removal.