Injector Control. (Injection Quantity Control)
CAUTION:
After executing the operation check mode, execute the Clear Memory Mode < Ref. to
OPERATION , Clear Memory Mode. >.
- On the «System operation check mode» display, select the {Injector Control}.
- On the «Injector Control» display screen, select the {Injection Quantity Control}.
- On the «Start the Engine» display screen, start the engine and click the [OK] button.
- In the «Injection Quantity Control» screen, click the [ ↑] button or the [ ↓] button to change the setting values, then click the [OK] button.
Setting is possible in a range between 0 - 20%, in increments of 1%.
- Click the [Cancel] button to end the injection quantity control. The screen will return to the «Injector Control» screen.