LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2008 >> Outback XT Limited, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Engine (Diagnostics) (H4DOTC) >> System Operation Check Mode >> Operation >> Injector Control. (Injection Stop Mode)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Injector Control. (Injection Stop Mode)

CAUTION: After executing the operation check mode, execute the Clear Memory Mode < Ref. to OPERATION , Clear Memory Mode. >.
  1. On the «System operation check mode» display, select the {Injector Control}.
  2. On the «Injector Control» display screen, select the {Injection Stop Mode}.
  3. Select the desired injector number on the «Injection Stop Mode» screen, and click the [OK] button.
  4. On the «Start the Engine» display screen, start the engine and click the [OK] button.
  5. Click the [Cancel] button to return the «Injection Stop Mode» display screen.
  6. On the «Injection Stop Mode» display screen, click the [Return] button to end the «Injection Stop Mode». The screen will return to the «Injector Control» screen.
scientia non olet · About LEMON Manuals