Selector Position
SELECTOR POSITION SPECIFICATION
| P (Park) | Transmission is in neutral, output member is immovable, engine start is possible |
| R (Reverse) | Transmission is in reverse. |
| N (Neutral) | Transmission is in neutral and engine start is possible |
| D (Drive) | Automatic gear change 1st ↔ 2nd ↔ 3rd ↔ 4th harr; 5th |
| Manual mode (+) | Manual gear change 1st → 2nd → 3rd → 4th → 5th |
| Manual mode (-) | Manual gear change 1st ← 2nd ← 3rd ← 4th ← 5th |
| Control method | Wire cable type |