Fuel Pump Control (On/Off Operation)
CAUTION:
After executing the operation check mode, execute the Clear Memory Mode <Ref. to
OPERATION , Clear Memory Mode.>.
- On the « System operation check mode » display, select the {Fuel Pump Control}.
- On the « Fuel Pump Control » display screen, select the {ON/OFF Operation}.
- On the « Turn Ignition Switch ON with Engine Stalled » display screen, turn the ignition switch to ON and click the [OK] button.
- Click the [Cancel] button to end the ON/OFF drive. The screen will return to the « Fuel Pump Control » screen.NOTE: For detailed operation procedure, refer to the "PC application for Subaru Select Monitor".