Injector Control (Injection Stop Mode)
CAUTION:
After executing the operation check mode, execute the Clear Memory Mode. Refer to
OPERATION , Clear Memory Mode.
- On the «System Operation Check Mode» display, select the {Injector Control}.
- On the «Injector Control» display screen, select the {Injection Stop Mode}.
- Select the desired injector number on the «Injection Stop Mode» screen, and click the [OK] button.
- On the «Start the Engine» display screen, start the engine and click the [OK] button.
- Click the [Cancel] button to return the «Injection Stop Mode» display screen.
- On the «Injection Stop Mode» display screen, click the [Return] button to end the «Injection Stop Mode». The screen will return to the «Injector Control» screen.
NOTE:
For detailed operation procedure, refer to the PC application help for Subaru Select Monitor.