Connecting Rod, Engine

Connecting rod
Bend or twist per 100 mm (3.94 in) Service limit 0.1 mm (0.0039 in)
Thrust clearance Standard 0.070 - 0.330 mm (0.0028 - 0.0130 in)
Bearing of large end
Oil clearance Standard 0.017 - 0.045 mm (0.0007 - 0.0018 in)
Bearing size (Thickness at center)
Standard 1.490 - 1.502 mm (0.0587 - 0.0591 in)
0.03 mm (0.0012 in) US 1.504 - 1.512 mm (0.0592 - 0.0595 in)
0.05 mm (0.0020 in) US 1.514 - 1.522 mm (0.0596 - 0.0599 in)
0.25 mm (0.0098 in) US 1.614 - 1.622 mm (0.0635 - 0.0639 in)
Bushing of small end
Clearance between piston pin and bushing Standard 0 - 0.022 mm (0 - 0.0009 in)

Connecting rod bolt 52 Nm (5.3 kgf-m, 38.4 ft lb)