LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2009 >> Outback Limited >> Repair and Diagnosis >> Brakes >> Traction Control >> Vehicle Dynamics Control (VDC) (Diagnostics) >> Subaru Select Monitor >> Operation >> Read Current Data
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Read Current Data

  1. On the «Main Menu» display, select the {Each System Check}.
  2. On the «System Selection Menu» display, select the {Brake Control System}.
  3. Click the [OK] button after the {VDC} is displayed.
  4. On the «Brake Control Diagnosis» display, select the {Current Data Display & Save}.
  5. On the «Data Display Menu» display, select the data display method.
  6. Using the scroll key, scroll the display screen up or down until necessary data is shown.
    • A list of the support data is shown in the following table.
      SUPPORT DATA LIST

      Display Contents to be displayed Unit of measure
      FR Wheel Speed Wheel speed detected by front ABS wheel speed sensor RH is displayed. km/h or MPH
      FL Wheel Speed Wheel speed detected by front ABS wheel speed sensor LH is displayed. km/h or MPH
      RR Wheel Speed Wheel speed detected by rear ABS wheel speed sensor RH is displayed. km/h or MPH
      RL Wheel Speed Wheel speed detected by rear ABS wheel speed sensor LH is displayed. km/h or MPH
      Steering Angle Sensor Op Steering angle detected by steering angle sensor is displayed. deg
      Yaw Rate Sensor Output Vehicle angular speed detected by yaw rate sensor is displayed. deg/s
      Pressure Sensor Output Brake fluid pressure detected by pressure sensor is displayed. bar
      Lateral G Sensor output Vehicle lateral acceleration detected by lateral G sensor is displayed. m/s (m/s2 )
      ABS_CM Power Voltage Voltage supplied to VDCCM & H/U is displayed. V
      E/G Control Stop Flag Engine control command signal is displayed. 1 or 0
      ABS Control Flag ABS operation condition is displayed. ON or OFF
      EBD Control Flag EBD operation condition is displayed. ON or OFF
      TCS Control Flag TCS operation condition is displayed. ON or OFF
      VDC Control Flag VDC operation condition is displayed. ON or OFF
      OFF Lamp ON/OFF condition of VDC OFF indicator light is displayed. ON or OFF
      EBD Warning Light ON operation of the EBD warning light is displayed. ON or OFF
      ABS Warning Light ON operation of the ABS warning light is displayed. ON or OFF
      VDC Warning Light ON operation of the VDC warning light is displayed. ON or OFF
      Valve Relay Signal Valve relay operation signal is displayed. ON or OFF
      Motor Relay Signal Motor relay operation signal is displayed. ON or OFF
      M. Relay monitor Voltage Voltage applied to the motor relay is displayed. V
      OFF SW Signal Operation condition of VDC OFF switch is displayed. ON or OFF
      Brake Switch Brake ON/OFF is displayed. ON or OFF
      NOTE: For detailed operation procedure, refer to the "Subaru Select Monitor ".
scientia non olet · About LEMON Manuals