SUBARU Select Monitor (Normal Mode)

On the «Main Menu» display screen, select the {Each System Check}.
On the «System Selection Menu» display screen, select the {Engine Control System}.
Click the [OK] button after the information of engine type has been displayed.
On the «Engine Diagnosis» display screen, select the {Diagnostic Code(s) Display}.
On the «Diagnostic Code(s) Display» display screen, select the {Temporary Diagnostic Code(s)} or {Memorized Diagnostic Code(s)}.
NOTE:
- For detailed operation procedures, refer to the "SUBARU SELECT MONITOR ".
- For details concerning DTC, refer to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) .