Fuel Pump Control (On/Off Drive)
CAUTION:
After executing the system operation check mode, execute the Clear Memory Mode. Refer to
OPERATION , Clear Memory Mode.
- On the «System Operation Check Mode» display screen, select the {Fuel Pump Control}.
- On the «Fuel Pump Control» display screen, select the {ON/OFF Dr.}.
- On the «Turn Ignition Switch ON with Engine OFF» display screen, turn the ignition switch to ON and click the [OK] button.
- On the «ON/OFF Dr.» display screen, click the [Execution] button and execute the ON/OFF drive.
- Click the [Cancel] button to stop the ON/OFF drive.
- Click the [[F12] Exit] button to end the ON/OFF drive. The screen will return to the «Fuel Pump Control» screen.NOTE: For detailed operation procedures, refer to the "SUBARU SELECT MONITOR ".