6MT Model

Install in the reverse order of removal.
NOTE: Before installing the operating cylinder, apply grease (KOPR-KOTE: Part No. 003603001) to the contact point of the release lever and operating cylinder.

Tightening torque:

T1: 18 N.m (1.8 kgf-m, 13.3 ft-lb)

T2: 41 N.m (4.2 kgf-m, 30.2 ft-lb)

Fig 1: Identifying Operating Cylinder Bolts Tightening Torque
Courtesy of SUBARU OF AMERICA, INC.
NOTE:
- Be sure to install the clutch hose with the mark side facing upward.
- Be careful not to twist the clutch hose during installation.
  
  Fig 2: Identifying Clutch Hose With Mark Side Facing Upward
  Courtesy of SUBARU OF AMERICA, INC.
After bleeding air from the operating cylinder, ensure that the clutch operates properly. Refer to CLUTCH FLUID AIR BLEEDING .