Check With SUBARU Select Monitor

CAUTION: Check that the rear window defogger timer is in initial setting or customize setting before performing inspection.

Check the input signal when the rear window defogger switch is operated using Subaru Select Monitor.
1. Prepare the Subaru Select Monitor. Ref. to PREPARATION TOOL , General Description .
2. Turn the ignition switch to ON (engine OFF) and run the "PC application for Subaru Select Monitor".
3. On the «System Selection Menu» display screen, select {Integ. Unit mode}.
4. Select the {Current Data Display & Save}.
5. Display the data of rear window defogger switch.
Turn the rear window defogger switch to ON, and check if it will be turned to OFF in 15 minutes, or repeats 15 minutes operation and 2 minutes stop.
If it turns to OFF in step 2) above, it is normal. If it repeats 15 minutes operation and 2 minutes stop, replace the body integrated unit.