Freeze Frame Data
NOTE:
- Data stored at the time of trouble occurrence is shown on display.
- Each time trouble occurs, the latest information is stored in the freeze frame data in memory.
FREEZE FRAME DATA
| Display | Contents to be displayed |
|---|---|
| IG counter | Number of times ignition switch turned to ON is displayed. |
| diagnostic trouble code | The recorded failure code is displayed. |
| FR Wheel Speed | Wheel speed detected by front ABS wheel speed sensor RH is displayed in km/h or MPH. |
| FL Wheel Speed | Wheel speed detected by front ABS wheel speed sensor LH is displayed in km/h or MPH. |
| RR Wheel Speed | Wheel speed detected by rear ABS wheel speed sensor RH is displayed in km/h or MPH. |
| RL Wheel Speed | Wheel speed detected by rear ABS wheel speed sensor LH is displayed in km/h or MPH. |
| Vehicle Speed | Vehicle speed calculated by VDC control module is displayed. |
| G Sensor First Axis(GLI) | The sensor value for a 45° angle crossed 2 axis G sensor is displayed. |
| G Sensor Sec Axis (GL2) | |
| Yaw Rate Sensor Output | Vehicle angular speed detected by yaw rate sensor is displayed. |
| ABS_CM Power Voltage | Voltage supplied to VDC control module is displayed. |
| Steering Angle Sensor Malfunction | Steering angle detected by steering angle sensor is displayed. |
| Pressure Sensor Output | Brake fluid pressure detected by pressure sensor is displayed. |
| Engine Speed | Engine speed on malfunction occurrence is displayed. |
| Accel. Opening Angle | Acceleration opening is displayed. |
| Gear Position | Gear position on malfunction occurrence is displayed. |
| Steering Angle Sens Code | The recorded steering angle sensor failure code is displayed? |
| ABS Control Flag | ABS control condition is displayed. |
| EBD Control Flag | EBD control condition is displayed. |
| Brake Switch | Brake ON/OFF is displayed. |
| TCS Control Flag | TCS control condition is displayed. |
| VDC Control Flag | VDC control condition is displayed. |
| E/G Control Stop Flag | Engine control command signal is displayed. |
| Steering angle flag | Whether the absolute angle was determined is displayed. |
| OFF SW Signal | Operation condition of TCS OFF switch is displayed. |