LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2009 >> Tribeca Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Engine (Diagnostics) (H6DO) >> System Operation Check Mode >> Operation >> EGR Valve Control
April 5, 2026: LEMON Manuals is launched! Read the announcement.

EGR Valve Control

CAUTION: After executing the operation check mode, execute the Clear Memory Mode. Ref. to OPERATION , Clear Memory Mode.
  1. On the «System Operation Check Mode» display, select the {EGR Valve Control}.
  2. On the «Start the Engine» display screen, start the engine and click the [OK] button.
  3. In the «EGR Valve Control» screen, click the [triangle] button or the [down triangle] button to change the setting values, then click the [OK] button.

    Setting is possible in increments of 1 STEP. However, the STEP number that can actually be controlled will vary depending on the vehicle.

  4. Click the [Cancel] button to stop the EGR valve control.
  5. Click the [[F12] Exit] button to end the EGR valve control. The display will then return to the «System Operation Check Mode» screen.
    NOTE: For detailed operation procedure, refer to SUBARU SELECT MONITOR .
scientia non olet · About LEMON Manuals