Front Axle: Assembly

WARNING: This page is about a different car, the 2009 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Assemble the front hub unit bearing. Refer to ASSEMBLY , Front Hub Unit Bearing .
Place the disc cover between housing and front hub unit, and tighten the four bolts.

Tightening torque:

65 N.m (6.6 kgf-m, 47.9 ft-lb)

Fig 1: Locating Housing Bolts

Courtesy of SUBARU OF AMERICA, INC.

CAUTION:

Do not get closer the tool which charged magnetism to magnetic encoder.
Be careful not to damage the magnetic encoder.

Fig 2: Identifying Front Hub Unit Bearing And Magnetic Encoder

Courtesy of SUBARU OF AMERICA, INC.