Symptom Chart
WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
| Symptoms | Repair order | Reference |
|---|---|---|
| The door lock control system does not operate. | 1. Remove and visually check the following fuses.
|
If the fuse is blown out, replace the fuse with a new part. When there is no defective with the fuse, check the power supply and ground circuit. Refer to , CHECK POWER SUPPLY AND GROUND CIRCUIT , INSPECTION, Door Lock Control System. |
| 2. Check the power supply and ground circuit for body integrated unit. | Refer to , CHECK POWER SUPPLY AND GROUND CIRCUIT , INSPECTION, Door Lock Control System. | |
| 3. Check the door lock switch and the circuit. | Refer to , CHECK DOOR LOCK SWITCH , INSPECTION, Door Lock Control System. | |
| 4. Check the rear gate/trunk opener button and the circuit. | Refer to , CHECK REAR GATE/TRUNK OPENER BUTTON SWITCH CIRCUIT , INSPECTION, Door Lock Control System. | |
| 5. Check the door lock actuator and the circuit. | Refer to , CHECK DOOR LOCK ACTUATOR AND CIRCUIT. , INSPECTION, Door Lock Control System. | |
| A specific door lock actuator does not operate. | Check the door lock actuator and circuit. | Refer to , CHECK DOOR LOCK ACTUATOR AND CIRCUIT. , INSPECTION, Door Lock Control System. |