Disassembly Of Combination Meter Assembly

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

Use gloves to avoid damage and getting fingerprints on the glass surface and meter surfaces.
Be careful not to apply excessive force to the trip knob.
Be sure not to touch the meter indicator needle.

Disengage the claw, and remove the meter glass (A) and meter visor (B) from the meter case assembly (C).

Fig 1: Identifying Meter Glass, Meter Visor And Meter Case Assembly

Courtesy of SUBARU OF AMERICA, INC.