Section 63 (Body Control System Diagnostics): General Description: Inspection

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Before performing diagnosis, check the following items which might affect body control system problems.

Measure the battery voltage and check electrolyte.
Standard voltage: 12 V or more

Specific gravity: 1.260 or more
Check the fuse condition.
Make sure that ampere of the fuse is setting value, and it is not blown out.
Check the connecting condition of harness and harness connector.
Confirm settings of body integrated unit are corresponded to vehicle equipment. Refer to , OPERATION , Registration Body Integrated Unit.
Make sure that the User Customizing of the body integrated unit matches the vehicle equipment. Refer to , OPERATION , User Customizing.
Confirm "Factory initial setting" of body integrated unit registrations is "Market".
Confirm key illumination does not blink with ignition switch turned to ON.