Cruise Control Command Switch: Inspection

Check the resistance between cruise control command switch terminals.

Fig 1: Identifying Cruise Control Command Switch Connector Terminals

Courtesy of SUBARU OF AMERICA, INC.

CRUISE CONTROL COMMAND SWITCH TERMINALS RESISTANCE REFERENCE CHART

Switch	Position	Terminal No.	Standard
CANCEL SET/COAST RESUME/ACCEL	All OFF	7 and 6	Approx. 4 kΩ
CANCEL	ON	7 and 6	Less than 1 Ω
SET/COAST	ON	7 and 6	Approx. 250 Ω
RESUME/ACCEL	ON	7 and 6	Approx. 1500 Ω
MAIN (CRUISE)	OFF	8 and 6	1 MΩ or more
MAIN (CRUISE)	ON	8 and 6	Less than 1 Ω

Replace the cruise control command switch if the inspection result is not within the standard value.