Timing Cover: Service and Repair

Timing Belt Cover

REMOVAL

1) Remove the crank pulley.
2) Remove the stopper rod.





3) Remove the timing belt cover LH (A).
4) Remove the front timing belt cover (B).





INSTALLATION

1) Install the front timing belt cover (B).

Tightening torque:
5 Nm (0.5 kgf-m, 3.7 ft-lb)

2) Install the timing belt cover LH (A).

Tightening torque:
5 Nm (0.5 kgf-m, 3.7 ft-lb)





3) Install the stopper rod.

Tightening torque:
36 Nm (3.7 kgf-m, 26.6 ft-lb)





4) Install the crank pulley.

INSPECTION

Check the timing belt cover for damage.