General Diagnostic Table: Inspection
WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
| Contents | Operation | Specifications | Note | |
|---|---|---|---|---|
| YES | NO | |||
| Diagnostic code | DTC is displayed when inspecting all DTCs. | Perform the diagnosis according to DTC. | System is normal. | - |
| Speedometer | Faster vehicle speed than the actual speed is displayed. | VDC CM data may not be received. | System is normal. | Also, check vehicle speed pulse circuit. |
| Fuel gauge | Fuel is present, but displayed less than actual amount. | Communication error may be present. | System is normal. | Also, check the fuel gauge. |
| Fuel level warning light | Fuel is present, but the light illuminates. | Communication error may be present. | System is normal. | Also, check the fuel gauge. |
| Engine coolant temperature light | Engine coolant temperature illuminates in red or blue. | Communication error may be present. | System is normal. | Check the engine coolant light related items. |
| [S], [I] or [S#] indicator | Blinking. | Communication error may be present. | System is normal. | Check the intelligent switch. |
| VDC indicator | Illuminating. | Communication error may be present. | System is normal. | Check that VDC is not operating. |
| VDC OFF indicator | Illuminating. | Communication error may be present. | System is normal. | Check that VDC is not OFF. |
| Electronic parking brake warning, etc. | Blinking. | Communication error may be present. | System is normal. | Check the electronic parking system as well. |
| Brake warning, etc. | Illuminating. | Brake fluid may be low in amount, or communication error may be present. | System is normal. | Check brake related items. |
| Shift position | Not displayed. | Communication error may be present. | System is normal. | Also, check AT system. |
| AT temperature light | Blinking. | Communication error may be present. | System is normal. | Also, check AT system. |
| Door indicator | Not displayed. | Communication error may be present. | System is normal. | Check the door switch. |
| Clearance indicator | Not illuminating. | Communication error may be present. | System is normal. | Check the combination switch. |
| Hi beam indicator | Not illuminating. | Communication error may be present. | System is normal. | Check the combination switch. |
| Front fog indicator | Not illuminating. | Communication error may be present. | System is normal. | Check the combination switch. |
| Illumination | Illuminating at the maximum brightness. | Communication error may be present. | System is normal. | Also, check the illumination switch. |
| Cruise control indicator | Not illuminating. | Communication error may be present. | System is normal. | Check the cruise control system. |
| AWD indicator | Not illuminating. | Communication error may be present. | System is normal. | Check TCM. |
| Hill hold indicator | Not illuminating. | Communication error may be present. | System is normal. | Also, check VDC CM. |