Front Brake Pad: Inspection

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Check the pad thickness (A).

NOTE:

Always replace the pads of both wheels and both sides as a set.
Replace pad clips if they are twisted or worn.
Replace the pad if there is oil or grease on it.

Fig 1: Checking Pad Thickness

Courtesy of SUBARU OF AMERICA, INC.

Standard		Wear limit
Pad thickness (A)	11 mm (0.43 in)	1.5 mm (0.059 in)

If the wear limit is exceeded in the inspection, replace the brake pad.