Check Back-Up Light Switch (Mt Model)
WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the back-up light switch connector.
- Measure the resistance between back-up light switch terminals.
Preparation tool: Circuit tester
Courtesy of SUBARU OF AMERICA, INC.
Terminal No. Inspection conditions Specification 1 - 2 When shift lever is set in reverse position Less than 1 Ω Other positions 1 MΩ or more - Replace the back-up light switch if the inspection result is not within the standard value.