Secondary Pressure Sensor: Inspection

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Remove the instrument panel lower cover. Refer to INSTRUMENT PANEL LOWER COVER EI-63, REMOVAL, Instrument Panel Lower Cover.
Start and warm up the engine.
Check the voltage of secondary pressure sensor with engine idling.
Connector & terminal

(B54) No. 17 (+) - No. 15 (-):

Specification

0.7 - 0.9 V

Fig 1: Identifying Instrument Panel Lower Cover
Courtesy of SUBARU OF AMERICA, INC.