LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2011 >> Outback i, Automatic CVT >> Repair and Diagnosis >> External Pages >> Different car >> Section 121 (Lighting System) >> Combination Switch (Light) >> Inspection >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Combination Switch (Light): Inspection: Notes

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the combination switch (light) connector.
  2. Measure the resistance between combination switch (light) connector terminals.

    Preparation tool: Circuit tester 

    Fig 1: Identifying Combination Switch (Light) Connector Terminals
    G06653426Courtesy of SUBARU OF AMERICA, INC.
  3. Replace the combination switch (light) if the inspection result is not within the standard value.
scientia non olet · About LEMON Manuals