Turbo Model
GENERAL SPECIFICATION CHART
| Item | Specifications | ||
|---|---|---|---|
| Vehicle model | AT | ||
| Starter | Type | Reduction type | |
| Model | M000T20175 | ||
| Manufacturer | Mitsubishi Electric | ||
| Voltage and output | 12 V - 1.4 kW | ||
| Direction of rotation | Counterclockwise (when observed from pinion) | ||
| Number of pinion teeth | 9 | ||
| Armature commutator runout | Standard | 0.05 mm (0.0020 in) | |
| Limit | 0.10 mm (0.0039 in) | ||
| Armature depth of segment mold | Standard | 0.5 mm (0.020 in) | |
| Brush length | Standard | 12.3 mm (0.484 in) | |
| Limit | 7.0 mm (0.276 in) | ||
| Brush spring force | Standard | 15.9 - 19.5 N (1.62 - 1.99 kgf, 3.57 - 4.38 lbf) | |
| Limit | 2.5 N (0.25 kgf, 0.56 lbf) | ||
| No-load characteristics | Voltage | 11 V | |
| Current | 90 A or less | ||
| Rotating speed | 2, 000 rpm or more | ||
| Load characteristics | Voltage | 7.7 V | |
| Current | 400 A | ||
| Torque | 16.7 N.m (1.7 kgf-m, 12.3 ft-lb) or more | ||
| Rotating speed | 710 rpm or more | ||
| Lock characteristics | Voltage | 3.5 V | |
| Current | 960 A or less | ||
| Torque | 31 N.m (3.2 kgf-m, 22.9 ft-lb) or more | ||
| Generator | Type | Rotating-field three-phase type, voltage regulator built-in type, with load response control system | |
| Model | A3TG6591 | ||
| Manufacturer | Mitsubishi Electric | ||
| Voltage and output | 12 V - 110 A | ||
| Polarity on ground side | Negative | ||
| Direction of rotation | Clockwise (when observed from pulley side) | ||
| Stator connection | 3-phase Y-type | ||
| Output current | 1, 500 rpm - 50 A or more 2, 500 rpm - 91 A or more 5, 000 rpm - 105 A or more |
||
| Regulated voltage | 14.1 - 14.8 V [20°C (68°F)] | ||
| Rotor slip ring outer diameter | Standard | 22.7 mm (0.894 in) | |
| Limit | 22.1 mm (0.870 in) | ||
| Brush length | Standard | 18.5 mm (0.728 in) | |
| Limit | 5.0 mm (0.197 in) | ||
| Battery | Type and capacity | 12 V - 52 AH(65D 23L) | |