LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2012 >> Forester XT Premium >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - Diagnostics >> Clear Memory Mode >> Operation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Clear Memory Mode: Operation

  1. Shift the select lever to "P" range.
  2. Using the Subaru Select Monitor, on the << Main Menu >> display, select {Each System Check}.
  3. On << Each System Check Menu >> display, select {Transmission Control System}.
  4. After transmission type information is displayed, select [OK].
  5. On << transmission Diagnosis >> display, select {Clear Memory}.
  6. When "Done. Turn off the ignition switch." is displayed, select [OK].
  7. Turn the ignition switch to OFF. To turn the ignition switch to ON again, wait for 10 seconds or more.
  8. Turn the Subaru Select Monitor to OFF.
    NOTE:
    • If {Clear Memories 2} is executed, DTCs and learned control memory are cleared.
    • If {Clear Memories 2} is executed, perform learning. < Ref. to LEARNING CONTROL . >
scientia non olet · About LEMON Manuals