Engine Control Module (ECM): Removal

Disconnect the ground cable from battery.

Fig 1: Connecting/Disconnecting Battery Ground Cable
Courtesy of SUBARU OF AMERICA, INC.
Remove the back panel - pocket. Refer to REMOVAL , Glove Box.
Disconnect the connector from ECM.

Fig 2: Locating ECM Connector Terminals
Courtesy of SUBARU OF AMERICA, INC.
Remove the harness clip, and push the tabs to remove the relay block.

Fig 3: Locating Relay Block Tabs And Harness Clip
Courtesy of SUBARU OF AMERICA, INC.
Remove the bolts and nuts, and remove the ECM.

Fig 4: Locating ECM Mounting Bolts And Nuts
Courtesy of SUBARU OF AMERICA, INC.