Combination Switch (Light): Removal

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the ground cable from the battery.
Remove the screws and remove the steering column covers (upper and lower).

Fig 1: Locating Steering Column Covers Screws (Upper And Lower)
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the connector from the combination switch.
Remove the screws which secure the switch, then remove the combination switch.

Fig 2: Locating Combination Switch Screws
Courtesy of SUBARU OF AMERICA, INC.