Section 3 (Front Suspension System): General Description: Specification
WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.
FRONT WHEEL SPECIFICATION CHART
| Front | Wheel arch height | 452 (17.8) | |
| (Tolerance: +12 mm-24 mm (+0.47 in-0.94 in )) | mm (in) | ||
| Camber (Tolerance: ±0°45' Differences between RH and LH: 45' or less) | 0°10' | ||
| Caster (Referential Value) | 3°40' | ||
| Steering angle (Tolerance: ±1.5°) | Inner wheel | 37.0° | |
| Outer wheel | 32.0° | ||
| Toe-in | mm (in) | 0±3 (0±0.12) Toe angle (sum of both wheels): 0°±0°14' | |
| Kingpin angle (Referential Value) | 11°58' | ||
| Rear | Wheel arch height | 449 (17.7) | |
| (Tolerance:+12 mm-24 mm (+047 in-0.94 in )) | mm (in) | ||
| Camber (Tolerance: ±0°45' Differences between RH and LH: 45' or less) | -0°15' | ||
| Toe-in | mm (in) | 2±2 (0.08±0.08) Toe angle (sum of both wheels): 0°10'±0°10' | |
| Thrust angle (Tolerance: ±0°30') | 0° | ||
NOTE:
- Front and rear toe-in and front camber can be adjusted. Adjust if the toe-in or camber tolerance exceeds specifications.
- Other items indicated in the specifications chart cannot be adjusted. If other items exceed specifications, check the suspension parts and connections for deformation, and replace with new parts as required.