Rear Sub Frame: Installation
WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- Be sure to use a new self-locking nut.
- Always tighten bushings with wheels in full contact with the ground and the vehicle at curb weight.
- Install in the reverse order of removal.
Tightening torque:
Refer to "COMPONENT" of "General Description" for the tightening torque. Refer to COMPONENT , General Description.
- Bleed air from brake system.
- Inspect the wheel alignment and adjust if necessary.