LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2012 >> Outback Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Anti-Theft System - Security And Locks) >> Impact Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Impact Sensor: Removal

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the key from ignition switch.
  2. Close all doors and the rear gate.
  3. Press the UNLOCK button of the keyless transmitter.
  4. Change the setting of impact sensor using Subaru Select Monitor.
  5. Disconnect the ground cable from the battery.
  6. Remove the impact sensor.
scientia non olet · About LEMON Manuals