LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2012 >> Outback Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Sunroof System) >> Glass Lid >> Forced Drive
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Forced Drive

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.

If glass lid dose not operate or is not supplied with power, move the glass lid using the hexagon wrench*.

*: L shape universal purpose hexagon wrench width across flat 4 mm (0.16 in) 

  1. Remove the spot map light. Refer to SPOT MAP LIGHT REMOVAL, Spot Map Light.
  2. Remove the sunroof opening trim.
    Fig 1: Identifying Sunroof Opening Trim
    G05004541Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the sun visor clip.
  4. Insert the hexagon wrench securely until it touches the motor shaft edge.
    CAUTION: Make sure not to bend or wrinkle the roof trim during work.
  5. Turn the hexagon wrench, and move the glass lid.