LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2012 >> Outback Base, Automatic CVT Trans >> Repair and Diagnosis >> General Information >> OBD-II Drive Cycles >> Drive Cycles >> Drive Cycle G >> Diagnostic Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Diagnostic Procedure

  1. Remove the battery negative terminal, and reconnect after 10 seconds have passed.
  2. Idle the engine until engine coolant temperature is 80°C (176°F).
  3. Stop the engine to decrease the engine coolant temperature down to 40°C (104°F) or less.
    NOTE: Do not let engine coolant temperature drop below 5°C (41°F).
  4. Idle the engine until engine coolant temperature is 80°C (176°F).
  5. Stop the engine to decrease the engine coolant temperature down to 40°C (104°F) or less.
    NOTE: Do not let engine coolant temperature drop below 5°C (41 °F).
  6. Idle the engine.