Cruise Control Command Switch: Installation
CAUTION:
- Before handling the airbag module, refer to B: CAUTION .
- Do not allow harness and connectors to interfere or get tangled up with other parts.
- Align the center position of the roll connector. Refer to ROLL CONNECTOR .
- Align the alignment marks on the steering wheel and steering shaft.
- Install each part in the reverse order of removal.
Tightening torque:
Airbag module: 10 N.m (1.02 kgf-m, 7.4 ft-lb)
Steering wheel: 39 N.m (3.98 kgf-m, 28.8 ft-lb)
Clearance between column cover and steering wheel: 2 - 4 mm (0.08 - 0.16 in)