LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2012 >> Outback Base, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Intake Induction (H4SO) >> Air Intake Boot >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Air Intake Boot: Removal

  1. Remove the cover (A) and clip (B) from air intake boot assembly.
    Fig 1: Identifying Cover And Clip Of Air Intake Boot Assembly
    G06648482Courtesy of SUBARU OF AMERICA, INC.
  2. Loosen the clamp (A) which connects the air intake boot assembly and air cleaner case.
  3. Loosen the clamp (B) which connects the air intake boot assembly and throttle body.
    Fig 2: Identifying Air Intake Boot Clamps
    G06648483Courtesy of SUBARU OF AMERICA, INC.
  4. Disconnect the blow-by hose and remove the air intake boot assembly.
scientia non olet · About LEMON Manuals