LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2012 >> Outback Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Air Bag System) >> Front Sub Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Sub Sensor: Removal

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch to OFF.
  2. Disconnect the ground cable from battery and wait for at least 60 seconds before starting work.
  3. Remove the front bumper face. Refer to FRONT BUMPER FACE , REMOVAL, Front Bumper.
  4. Remove the bolt, and then detach the front sub sensor.
    Fig 1: Identifying Bolt And Front Sub Sensor
    G06340923Courtesy of SUBARU OF AMERICA, INC.
  5. Disconnect the connector from front sub sensor.
scientia non olet · About LEMON Manuals