Input Clutch Pack Assembly

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.

Assemble the input clutch assembly to rear internal gear.

Fig 1: Removing/Installing Input Clutch Assembly
Courtesy of SUBARU OF AMERICA, INC.
Install the front carrier, and then install the snap ring.

Fig 2: Removing/Installing Front Carrier And Snap Ring
Courtesy of SUBARU OF AMERICA, INC.
Install the thrust needle bearing.
Install the front sun gear.

Fig 3: Identifying Front Sun Gear
Courtesy of SUBARU OF AMERICA, INC.