Input Clutch Pack Assembly

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.

Remove the front sun gear.

Fig 1: Identifying Front Sun Gear
Courtesy of SUBARU OF AMERICA, INC.
Remove the thrust bearing.
Remove the snap ring, and then remove the front carrier.

Fig 2: Removing/Installing Front Carrier And Snap Ring
Courtesy of SUBARU OF AMERICA, INC.
Remove the input clutch assembly from rear internal gear.

Fig 3: Removing/Installing Input Clutch Assembly
Courtesy of SUBARU OF AMERICA, INC.