Direct Clutch Assembly

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.

Check the clearance of direct clutch.
Measure the clearance "L" between snap ring and retaining plate using a thickness gauge. If it is out of specification, replace them as direct clutch assembly.
Check for damage on the drive plate, driven plate and snap ring, and replace the direct clutch assembly if damaged.
Specification:

0.6 - 1.0 mm (0.024 - 0.039 in)

Fig 1: Measuring Clearance Between Snap Ring And Retaining Plate Using Thickness Gauge
Courtesy of SUBARU OF AMERICA, INC.