Drive Plate: Installation
WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.
- Temporarily tighten the drive plate.
- Using the ST, lock the crankshaft.
ST 498497100 CRANKSHAFT STOPPER
- Tighten the drive plate to the specified torque.NOTE: Tighten the drive plate mounting bolts gradually. Each bolt should be tightened in a crisscross order.
Tightening torque:
90 N.m (9.2 kgf-m, 66.4 ft-lb)
- Install the transmission assembly to the vehicle. Refer to INSTALLATION , Automatic Transmission Assembly.