Reduction Driven Gear: Assembly

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.

Using the ST, install the parking gear.
ST 499755602 PRESS

Fig 1: Identifying Parking Gear
Courtesy of SUBARU OF AMERICA, INC.
Install the snap ring.

Fig 2: Identifying Snap Ring
Courtesy of SUBARU OF AMERICA, INC.
Install the new ball bearing to reduction driven gear using press.
ST 18654AA000 INSTALLER

Fig 3: Identifying Ball Bearing Installer
Courtesy of SUBARU OF AMERICA, INC.
Install the ball bearing on the reverse side with the same procedure as step 3).
ST 18654AA000 INSTALLER

Fig 4: Identifying Ball Bearing
Courtesy of SUBARU OF AMERICA, INC.