LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2012 >> Outback Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Wiper System & Washer System) >> Combination Switch (Wiper) >> Inspection >> Combination Switch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Combination Switch

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect the continuity between each connector terminal.
    Fig 1: Identifying Combination Switch Connector Terminal
    G04991454Courtesy of SUBARU OF AMERICA, INC.
    COMBINATION SWITCH REFERENCE CHART

      Switch position Terminal No. Standard
    Front LO 7 and 17 Less than 1 Ω
    HI 8 and 17 Less than 1 Ω
    Washer ON 2 and 11 Less than 1 Ω
    Rear Washer ON 2 and 12 Less than 1 Ω
    OFF 2 and 10
    2 and 12
    2 and 13
    10 and 12
    10 and 13
    12 and 13
    1 MΩ or more
    INT 2 and 13 Less than 1 Ω
    ON 2 and 10 Less than 1 Ω
    Washer ON 2 and 12
    12 and 10
    2 and 10
    Less than 1 Ω
  2. If continuity is not as specified, replace the switch.