Wiper Blade: Assembly: Front

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.

Insert the wiper rubber onto the blade so that the stopper is in the position shown in the figure.

Fig 1: Identifying Stopper Position
Courtesy of SUBARU OF AMERICA, INC.
Make sure the wiper rubber is securely fastened to pull stopper (A).

Fig 2: Identifying Wiper Rubber Is Securely Fastened To Pull Stopper
Courtesy of SUBARU OF AMERICA, INC.