Section 45 (Anti-Theft System - Security And Locks): Transmitter: Inspection

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.

Measure the voltage between the keyless transmitter battery (+) terminal and (-) terminal.

NOTE: Battery discharge occurs during the measurement. Complete the measurement within 5 seconds.

Fig 1: Measuring Voltage Between Keyless Transmitter Battery (+) And (-) Terminals

Courtesy of SUBARU OF AMERICA, INC.

Tester connection		Standard
(+)	(-)	Standard
Battery Positive terminal	Battery Ground terminal	2.5 - 3.0 V

If NG, replace the battery. (Use CR1620 or equivalent.)