Section 45 (Anti-Theft System - Security And Locks): Transmitter: Removal

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.

Disassemble the keyless transmitter, and take out the transmitter case (1).

Fig 1: Identifying Keyless Transmitter And Transmitter Case
Courtesy of SUBARU OF AMERICA, INC.
Remove the claw, and open the transmitter case.

Fig 2: Locating Transmitter Case And Claw
Courtesy of SUBARU OF AMERICA, INC.
Remove the battery (1) from the transmitter.

NOTE: To prevent static electricity damage to the transmitter printed circuit board, touch the steel area of building with hand to discharge static electricity carried on body or clothes before disassembling the transmitter.

Fig 3: Identifying Transmitter Battery

Courtesy of SUBARU OF AMERICA, INC.