DTC Display Mode
WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.
When DTC display mode is operated, {ECM}, {TCM}, {ABS/VDC} is displayed repeatedly in this order by pressing the trip knob. DTC is displayed in the following table according to type of control module, receiving DTC, DTC detected, No DTC. If CAN communication has some trouble, "- - - -" is displayed.
DTC DISPLAY MODE CHART
| Control module | Condition | Display |
|---|---|---|
| ECM | Receiving DTC | Trip "A" + "P (Blink)" |
| DTC detected | Trip "A" + "P xxxx" | |
| No DTC | Trip "A" + "P - - - -" | |
| TCM | Receiving DTC | Trip "B" + "P (Blink)" |
| DTC detected | Trip "B" + "P xxxx" | |
| No DTC | Trip "B" + "P - - - -" | |
| ABS/VDCCM | Receiving DTC | Trip "A" + "C (Blink)" |
| DTC detected | Trip "A" + "C xxxx" | |
| No DTC | Trip "A" + "C - - - -" | |
| When CAN communication error is occurred | - | "- - - -" |